Lotion Vacuum Emulsifying Mixer Cosmetic Petroleum Jelly Body Cream Making Mixing Machine Homogenizer Emulsifier
Cost-effective Homogeniser With High Quality for for Making Cream Gel Lotion means that when the materials are under the vacuum condition, it makes use of the high shear emulsifier to distribute one or several to another continuous phase rapidly and evenly. The materials will be processed in the narrow space between stator and rotor by strong energy of motion produced by the machine effect. By the operation of hydraulic sheraing, centrifugal extruding, impacting, breaking and turbulence for over 199 thousand times per minute, the materials will be disperesed and emulsifed instantly and evenly. After reciprocating circulation at high frequency, the fine finished products of stable and high quality without bubbles will be achieved.
The product mainly applied in such industries as daily chemical care products, food industry, paint and ink ,nanometer materials, petrochemical
Industry, printing and dyeing auxiliaries, pulp & paper, pesticide, ferilizer, plastic & rubber, electronic and electronics, fine chemical industry, etc. The emulsifying effect is more prominent for materials of high base viscosity and high solid content.
The Cost-effective Homogeniser With High Quality for for Making Cream Gel Lotion is mainly composed of water pot,oil pot,emulsifying pot, vacuum system, lifting system(optional), electronic control system (PLC is optional), operation, etc
Specific parameter requirements of emulsifier:
| 10L emulsifying pot |
Specific parameters |
| Enclosure material/thickness |
304L/3mm |
| Inner Layer Material/Thickness |
316L/3 mm |
| Sandwich material/thickness |
304L/3 mm |
| Matching water phase pot |
|
| Enclosure material/thickness |
304L/3mm |
| Inner Layer Material/Thickness |
316L/3 mm |
| Sandwich material/thickness |
304L/3 mm |
| Matching oil phase pot |
|
| Enclosure material/thickness |
304L/3mm |
| Inner Layer Material/Thickness |
316L/3 mm |
| Sandwich material/thickness |
304L/3 mm |
| Design capacity |
10L |
| Working capacity |
8L |
| Enclosure material/thickness |
304L/Standard |
| Inner Layer Material/Thickness |
316L/Standard |
| Sandwich material/thickness |
304L/Standard |
| Service life |
Over 10 years |
| Homogenizer power |
0.55 KW |
| Homogenizer speed |
2800 |
| Homogenization mode |
Upper homogenization |
| Lid opening method |
Manual or electric |
| Heating method |
Electric heating |
| Discharge method |
Inclined discharge |
| Sandwich operating pressure |
0.3 MPa |
| Vacuum degree in the pot |
-0.09 MPa |
| Overall dimensions (m) |
0.8*0.55*1.43 |
| Wearing parts |
1 year spare parts. spare parts |
| Warranty Period |
More than 1 year |
| Installation and |
The supplier is responsible for commissioning |
| Matching water phase pot |
|
| Design capacity |
5L |
| Working capacity |
4L |
| Enclosure material/thickness |
304L/Standard |
| Inner Layer Material/Thickness |
316L/Standard |
| Sandwich material/thickness |
304L/Standard |
| Sandwich operating pressure |
0.3 MPa |
| Lid opening method |
Movable lid opening |
| Heating method |
Electric heating |
| Discharge method |
Upper suction material |
| Stirring mode |
Down stirring |
| Stirring power |
0.025 KW |
| Stirring speed |
1440r/min |
| Matching oil phase pot |
|
| Design capacity |
5L |
| Working capacity |
4L |
| Enclosure material/thickness |
304L/Standard |
| Inner Layer Material/Thickness |
316L/Standard |
| Sandwich material/thickness |
304L/Standard |
| Lid opening method |
Movable lid opening |
| Heating method |
Electric heating |
| Discharge method |
Upper suction material |
| Stirring mode |
Upper (lower) stirring |
| Stirring power |
0.025 KW |
| Stirring speed |
1440r/min |
Other specific requirements:
1.The equipment is accompanied by the product manual.
2.The supplier provides equipment assembly drawings and pipeline installation drawings. When the equipment needs maintenance, the buyer shall notify the supplier in writing, and the supplier will arrive within 2 days after receiving the notice to ensure timely after-sales service.
3.Equipment. Supplier warranty for one year, lifetime maintenance.
4.This annex has the same legal effect as the contract.
5.The inner wall of the pot (316L) requires mirror polishing 300 mesh, equipment size:
6. Various pipelines are required to be made of stainless steel (316L material is required for the contact material part)
7. Dead weight of 10L emulsifier: about 500Kg
Product Tags:
|
|
Lotion Vacuum Emulsifying Machine Cosmetic Petroleum Body Cream Vacuum Emulsifier Mixer Images
|
