High Speed High Shear Homogenizer Mixer Dispersion Machine Food Paints Cream Emulsifier Cosmetic Mixing Equipment
High shear dispersing emulsifier effectively, quickly and evenly disperse a phase or phases to another consecutive phase, usually, these phases are dissolvable to each other. The rotor revolves quickly and strong force is produced through high tangent speed and high frequency mechanical effect, therefore, the material in the narrow slot among stator and rotor receives strong forces from mechanical and liquid shearing, centrifugal force pressing, liquid fraction, clashing, tearing and rush water. The dissolvable solid, liquid and gas material is then instantly dispersed and emulsified evenly and finely with better production procedures and appropriate additives and finally products with stable high quality are made. emulsifying prices granulator high shear mixer
Specific parameter requirements of emulsifier:
| 10L emulsifying pot |
Specific parameters |
| Enclosure material/thickness |
304L/3mm |
| Inner Layer Material/Thickness |
316L/3 mm |
| Sandwich material/thickness |
304L/3 mm |
| Matching water phase pot |
|
| Enclosure material/thickness |
304L/3mm |
| Inner Layer Material/Thickness |
316L/3 mm |
| Sandwich material/thickness |
304L/3 mm |
| Matching oil phase pot |
|
| Enclosure material/thickness |
304L/3mm |
| Inner Layer Material/Thickness |
316L/3 mm |
| Sandwich material/thickness |
304L/3 mm |
| Design capacity |
10L |
| Working capacity |
8L |
| Enclosure material/thickness |
304L/Standard |
| Inner Layer Material/Thickness |
316L/Standard |
| Sandwich material/thickness |
304L/Standard |
| Service life |
Over 10 years |
| Homogenizer power |
0.55 KW |
| Homogenizer speed |
2800 |
| Homogenization mode |
Upper homogenization |
| Lid opening method |
Manual or electric |
| Heating method |
Electric heating |
| Discharge method |
Inclined discharge |
| Sandwich operating pressure |
0.3 MPa |
| Vacuum degree in the pot |
-0.09 MPa |
| Overall dimensions (m) |
0.8*0.55*1.43 |
| Wearing parts |
1 year spare parts. spare parts |
| Warranty Period |
More than 1 year |
| Installation and |
The supplier is responsible for commissioning |
| Matching water phase pot |
|
| Design capacity |
5L |
| Working capacity |
4L |
| Enclosure material/thickness |
304L/Standard |
| Inner Layer Material/Thickness |
316L/Standard |
| Sandwich material/thickness |
304L/Standard |
| Sandwich operating pressure |
0.3 MPa |
| Lid opening method |
Movable lid opening |
| Heating method |
Electric heating |
| Discharge method |
Upper suction material |
| Stirring mode |
Down stirring |
| Stirring power |
0.025 KW |
| Stirring speed |
1440r/min |
| Matching oil phase pot |
|
| Design capacity |
5L |
| Working capacity |
4L |
| Enclosure material/thickness |
304L/Standard |
| Inner Layer Material/Thickness |
316L/Standard |
| Sandwich material/thickness |
304L/Standard |
| Lid opening method |
Movable lid opening |
| Heating method |
Electric heating |
| Discharge method |
Upper suction material |
| Stirring mode |
Upper (lower) stirring |
| Stirring power |
0.025 KW |
| Stirring speed |
1440r/min |
Other specific requirements:
1.The equipment is accompanied by the product manual.
2.The supplier provides equipment assembly drawings and pipeline installation drawings. When the equipment needs maintenance, the buyer shall notify the supplier in writing, and the supplier will arrive within 2 days after receiving the notice to ensure timely after-sales service.
3.Equipment. Supplier warranty for one year, lifetime maintenance.
4.This annex has the same legal effect as the contract.
5.The inner wall of the pot (316L) requires mirror polishing 300 mesh, equipment size:
6. Various pipelines are required to be made of stainless steel (316L material is required for the contact material part)
7. Dead weight of 10L emulsifier: about 500Kg
Product Tags:
|
|
Food High Speed High Shear Homogenizing Machine Mixer Dispersion Paints Emulsifying Mixer Images
|
